Chapter 8: Upgrade Kits; Boss-N1 Module Kit - Dell PowerEdge R860 Installation And Service Manual

The table lists the available After Point Of Sale [APOS] kits.
Table 96. Upgrade kits
Kits
Bezel
M.2 NVMe SSD
BOSS-N1
Drives
Memory
PERC
Network cards (Standard PCIe adapter
LP/FH)
Network cards (OCP)
PCIe SSD card
Power cords
Power supplies
Quick sync
TPM
Processor enablement thermal kits
Internal USB 3.0 card
Serial COM port
Cables
Fans
Heat sink
Risers
Rail
Cable Management Arm (CMA)
Topics:
•

BOSS-N1 module kit

• Internal USB card kit
BOSS-N1 module kit
The BOSS-N1 module supports up to two M.2 NVMe SSDs.
198 Upgrade Kits
Related links to service instructions
See Installing the front bezel
See Installing the M.2 NVMe SSD module
See Installing the BOSS-N1 controller card module
See Installing the drive
See Installing a memory module
See Installing the rear mounting front PERC module
included with the kit.
See Installing the LOM card and rear I/O board
See Installing the OCP card
See Installing the drive
Offered, but without special service instructions
See Installing a power supply unit
Offered, but without special service instructions
See Upgrading the Trusted Platform Module
See Installing the processor
See Internal USB card kit
See Installing the serial COM port
Offered, but without special service instructions
See Installing a fan
See Installing a processor heat sink module
Not available as APOS kits, upgrades offered only with the "Basic Deployment
Upgrade of Dell Server" service
Offered, but without special service instructions
Offered, but without special service instructions
NOTE: CMA is not supported in Direct Liquid Cooling configuration.
Upgrade Kits
and also see the document
8