Dell PowerEdge R960 Installation And Service Manual page 53

Table 52. NVMe-oF SubSystem n Settings (continued)
Option
DHCP
Host IP Address
Host Subnet Mask
Host Gateway
NVMe-oF subsystem info via DHCP
NVMe-oF subsystem NQN
NVMe-oF subsystem Address
NVMe-oF subsystem Port
NVMe-oF subsystem NID
NVMe-oF subsystem Controller ID
Security
Authentication Type
Securitykeypath
Integrated Devices
To view the Integrated Devices screen, power on the system, press F2, and click System Setup Main Menu > System BIOS
> Integrated Devices.
Table 53. Integrated Devices details
Option
User Accessible USB Ports
Internal USB Port
iDRAC Direct USB Port
Integrated Network Card1
Description
Enables and disables the DHCP for this NVMe-oF connection. This option is set to
Disabled by default.
Specifies the Host IP Address for this NVMe-oF connection.
Specifies the Host Subnet Mask for this NVMe-oF connection.
Specifies the Host Gateway for this NVMe-oF connection.
Enables and disables the NVMe-oF subsystem's DHCP for this connection. This
option is set to Disabled by default.
Specifies the NVMe-oF subsystem's NQN for this connection.
Specifies the NVMe-oF subsystem's IP address for this connection.
Specifies the NVMe-oF subsystem's port for this connection. This option is set to
4420 by default.
Specifies the NamespaceID (NID) for this NVMe-oF connection.
Specifies the NVMe-oF subsystem's Controller ID for this connection. This option
is set to 0 by default.
Enables or disables the security option for this NVMe-oF connection. This option is
set to Disabled by default.
Specifies the authentication type for this NVMe-oF connection. This option is set
to None by default.
Specifies the Securitykeypath for this NVMe-oF connection.
Description
Configures the user accessible USB ports. Selecting Only Back Ports On
disables the front USB ports; selecting All Ports Off disables all front and
back USB ports; selecting All Ports Off (Dynamic) disables all front and back
USB ports during POST and front ports can be enabled or disabled dynamically
by authorized user without resetting the system. This option is set to All Ports
On by default.
The USB keyboard and mouse still function in certain USB ports during the
boot process, depending on the selection. After the boot process is complete,
the USB ports will be enabled or disabled as per the setting.
Enables or disables the internal USB port. This option is set to On or Off. This
option is set to On by default.
The iDRAC Direct USB port is managed by iDRAC exclusively with no host
visibility. This option is set to ON or OFF. When set to OFF, iDRAC does not
detect any USB devices installed in this managed port. This option is set to On
by default.
Enables or disables the integrated network card. When this option is set to
Disabled, the card is not available to the operating system.
NOTE: If set to Disabled (operating system), the Integrated NICs might
still be available for shared network access by iDRAC.
Pre-operating system management applications 53