Installing The Riser Air Shroud - Dell PowerEdge R960 Installation And Service Manual

Figure 44. Removing the riser air shroud
Next steps
1. Replace the riser air shroud.

Installing the riser air shroud

Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in
3. Remove the support bar.
4. Remove the air shroud top cover
5. Remove the cooling fan cage
6. If required, remove the air
7. Remove the expansion card risers
NOTE: See cable routing
Steps
1. Align the slots on the riser air shroud with the guides on the system.
2. Lower the riser air shroud and, using the latches, slide it to the rear of the system until it is firmly seated.
84 Installing and removing system components
Safety instructions.
Before working inside your
assembly.
shroud.
or remove the full length expansion card
section for more information.
system.
riser.