Connecting A Video Source Using 3G Input Card - Christie D4K40-RGB Installation And Setup Manual

Port
Audio Out
HDBaseT
USB 1/USB 2
USB 3
Wired Keypad
3D Sync In/3D Sync Out
Ethernet
RS232
GPIO

Connecting a video source using 3G input card

The 3G input card (3GIC) accepts digital video data from HD and 3G-SDI (Serial Digital Interface)
sources.
Part number: 108-313101-02+
The input configurations listed below are supported.
Input configuration
Four-Port
One-Port
This card may or may not be included with your model. Standard inputs are subject to change. Refer
to the 4K40-RGB Specifications Guide (P/N: 020-102959-XX) for more details.
Related information
3GIC video formats (on page 50)
4K40-RGB Installation and Setup Guide–D4K40-RGB, Roadie 4K40-RGB
020-102961-03 Rev. 1 (08-2019)
Copyright 2019 Christie Digital Systems USA, Inc. All rights reserved.
©
Connecting devices and establishing communication
Description
Not supported.
Accepts video signals, Ethernet, and IR.
Connects a USB flash drive that has been formatted with a FAT32
file system. Can be used for upgrades, backups, restores,a nd
interrogators.
For manufacturing use only.
Physically connects a remote control to the projector.
Supported for 3D-enabled projectors.
Connects to the web user interface and can send Christie serial
commands.
Sends Christie serial commands using a standard RS232 serial
cable.
Provides a method for controlling the projector using electrical
signals.
Description
Enables connection of four SDI cables to two 3GIC cards.
Each SDI input supplies one quadrant or column of a 4K input
image. This configuration supports high resolution and high
frame rate input video streams.
Enables connection of one SDI cable to the 1-IN input of a
3GIC card (in any slot). In this configuration the SDI input
supplies the entire video raster.
Requirements
Two 3GIC cards
One 3GIC card
40