Connecting A Video Source Using Displayport; Connecting A Video Source Using 3G Input Card; Connecting A Video Source Using Hdmi - Christie Boxer 30 Installation And Setup Manual

Hide thumbs Also See for Boxer 30:

Table of Contents

Port

USB 3

Wired Keypad

3D Sync In/3D Sync Out

Ethernet

RS232

GPIO

Connecting a video source using DisplayPort

The Twin DisplayPort input card (TDPIC) accepts digital video data from the DisplayPort sources.

The 3G input card (3GIC) accepts digital video data from HD and 3G-SDI (Serial Digital Interface)

sources.

Enables connection of one SDI cable to the 1-IN input of a 3GIC card (in any slot). In this

configuration the SDI input supplies the entire video raster.

The Twin HMDI input card (THIC) accepts digital video data from HDMI sources.

Enables connection of one HDMI cable to the 1-IN input of a THIC card (in any slot). In this

configuration, the HDMI input supplies the entire video raster.

Boxer 30 Installation and Setup Manual

020-102017-01 Rev. 1 (11-2015)

Connecting devices and establishing communication

Description

For manufacturing use only.

Physically connects a remote control to the projector.

Supported for 3D-enabled projectors.

Connects to the web user interface and can send Christie serial

commands.

Sends Christie serial commands using a standard RS232 serial

cable.

Provides a method for controling the projector using electrical

signals. Not supported.

Table of Contents