Connecting A Video Source Using 3G Input Card; Connecting A Video Source Using Dvi - Christie Crimson Series Installation And Setup Manual

Port
Audio Out
HDBaseT
USB 1/USB 2
USB 3
Wired Keypad
3D Sync In/3D Sync Out
Ethernet
RS232
GPIO

Connecting a video source using 3G input card

The 3G input card (3GIC) accepts digital video data from HD and 3G-SDI (Serial Digital Interface)
sources.
Part number: 108-313101-02+
Enables connection of one SDI cable to the 1-IN input of a 3GIC card (in any slot). In this
configuration the SDI input supplies the entire video raster.
This card may or may not be included with your model. Standard inputs are subject to change. Refer
to the Crimson and Mirage Specifications Guide (P/N: 020-102724-XX) for more details.

Connecting a video source using DVI

The Dual Link DVI input card (DDIC) accepts digital video source from DVI sources. It does not
support incoming analog signals.
Part number: 108-312101-XX
Enables connection of one DVI cable to the DVI input of a DDIC card (in any slot). In this
configuration, the DVI input supplies the entire video raster.
Crimson Installation and Setup Guide–Crimson HD25, Crimson WU25, Crimson HD31, Crimson WU31, Mirage HD25, Mirage WU25
020-102647-07 Rev. 1 (12-2019)
Copyright 2019 Christie Digital Systems USA, Inc. All rights reserved.
©
Connecting devices and establishing communication
Description
Not supported.
Accepts video signals, Ethernet, and IR.
Connects a USB flash drive that has been formatted with a FAT32
file system. Can be used for upgrades, backups, restores,a nd
interrogators.
For manufacturing use only.
Physically connects a remote control to the projector.
Supported for 3D-enabled projectors.
Connects to the web user interface and can send Christie serial
commands.
Sends Christie serial commands using a standard RS232 serial
cable.
Provides a method for controlling the projector using electrical
signals.
36