13. Accessories
13.1 TAV vent valve and vent port adaptor (for nEXT300 turbo pump)
Two solenoid-operated vent-valves are available for system venting. The valves are 24 V
d.c., normally-open and can be driven by the Controller. The solenoid-valve is fitted in
place of the manual-valve, or alternatively can be fitted with an adaptor (supplied with
the valve) and can be used with any suitable NW10 flanged port on your vacuum system.
TAV5 is suitable for smaller vacuum systems. TAV6 has a higher conductance and is
suitable for larger vacuum systems (typically with volume greater than 10 litres).
Table 20 TAV vent valve kits and adaptor
Description
TAV5 vent-valve (orifice diameter 0.5 mm)
TAV6 vent-valve (orifice diameter 1.0 mm)
Vent port adaptor NW10 -1/8 inch BSP male
13.2 Outlet mist filter(for E2M1.5 rotary vacuum pump)
The outlet mist filter separates and traps oil droplets in the pump outlet to prevent oil
mist discharge.
For all other accessories such as gauges, active cables and mains leads, refer to the
pumping system ordering information in our product catalogue.
Table 21 Outlet mist filter
Description
EMF3 outlet mist filter
D39595880_A
D39595880_A - Accessories
Item number
A46220000
Page 43
Item number
B58066010
B58066020
B58066011
10/2020 - ©Edwards Limited