Edwards T-Station 300 Instruction Manual page 3

Edwards Ltd
Innovation Drive
Burgess Hill
West Sussex
RH15 9TW
UK
Declare that the following product
T-station 300
TS300 – XX – 00Y
Where:
XX - Backing pump option. W = Wet, D = Dry, number = pump type
Y - Electrical supply, Inlet flange option.
Is in conformity with the relevant requirements of European CE legislation:
2006/42/EC Machinery directive
Note: The safety objectives of the Low Voltage Directive 2014/35/EU were complied with in accordance
Appendix 1 No. 1.5.1 of this directive.
2014/30/EU Electromagnetic compatibility (EMC) directive
Class A Emissions, Industrial Immunity
2011/65/EU Restriction of certain hazardous substances (RoHS) directive
as amended by Delegated Directive (EU) 2015/863
Based on the relevant requirements of harmonised standards:
EN ISO 12100:2010
EN 1012-2:1996 +A1:2009
EN 61010-1:2010
EN 61326-1:2013
Documentation Officer:
This declaration, based on the requirements of the listed Directives and EN ISO/IEC 17050-1, covers all product
serial numbers from this date on: 2020-10-14
This declaration becomes invalid if modifications are made to the product.
Petr Smerek – Engineering Manager
Scientific Division
Lutin, CZ
CE Declaration of Conformity
Safety of machinery. General principles for design. Risk assessment and risk reduction
Compressors and vacuum pumps. Safety requirements. Vacuum pumps
Safety requirements for electrical equipment for measurement, control and laboratory
use. General requirements
Electrical equipment for measurement, control and laboratory use. EMC requirements. General
requirements
Jelena Havelkova, Spielberk Office Centre, Holandska 10, Brno, 63900 Czech Republic,
Tel: +42(0) 734 418 896, Email: documentation@edwardsvacuum.com
Nina Buta – General Manager
Lutin, CZ