Thermal Safety; Indirect Safety - WAGO 2789-9080 Product Manual

2789-9080

2.4 Thermal Safety

• The surface of the housing heats up during operation. Under special conditions (e.g., in
the event of a fault or increased surrounding air temperature), touching the product
may cause burns. Allow the product to cool down before touching it.
• The temperature inside the additional enclosure must not exceed the ambient tempera-
ture permitted for the mounted product.
• Cooling of the product must not be impaired. Ensure air can flow freely and that the
minimum clearances from adjacent products/areas are maintained.

2.5 Indirect Safety

• Only use a dry or cloth or a clothed dampened with water to clean the product. Do not
use cleaning agents, e.g., abrasive cleaners, alcohols or acetone.
• Clean tools and materials are imperative for handling the product.
• The product contains no parts that can be serviced by the user. Always have all ser-
vice, maintenance and repair work performed by specialists authorized by WAGO.
• Replace any defective or damaged devices.
| Version: 1.1.0
Communication Module IO-Link
Safety
9