Table of Contents
Advertisement
Restore Default: Click
default.
6.5 People Density
This function can detect the level of people density in the configured area.
6.5.1 Rule
Purpose:
Set up detection areas, density levels and linkage method on this page.
Steps:
1. Click
and draw detection area on live image. Click
Note:
You can set 8 areas at most, and the area can be set as polygon of 10 sides at most.
2. Set target size as Large-size Target (40*40 pixel) or Small-size Target (20*20 pixel) for each detection
area from the dropdown list.
Note:
Click
or
, a frame of 40*40 pixel or 20*20 pixel will be showed on live picture. Choose the
corresponding target size by comparing the target size with frame size.
User Manual of PanoVu Series Network Camera
to restore all the settings in advanced configuration to the factory
People Density Rule configuration
Figure 6-34
to clear all the areas.
97
Advertisement
Table of Contents
