Table of Contents
Advertisement
Face Filtering Time
It means the time interval between the camera detecting a face and taking a capture action.
If the detected face stays in the scene for less than the set filtering time, capture will not be
triggered. For example, if the face filtering time is set as 5 seconds, the camera will capture
the detected face when the face keeps staying in the scene for 5 seconds.
Note
The face filtering time (longer than 0s) may increase the possibility of the actual capture
times less than the set value above.
Facial Posture Filter
Facial posture filter can filter out face of certain postures. The figure on the right of the slider
stands for the posture angle which is acceptable in the face capture action. Click
the diagram illustrating the face turning direction when setting up this filter.
Upload Feature
Feature stands for the feature information the algorithm can tell from face pictures. Check the
function to upload the information.
Restore Parameters
Restore Defaults
Click Restore to restore all the settings in advanced configuration to the factory default.
10.4.4 Set Shield Region
The shield region allows you to set the specific region in which the set smart function rule is
invalid.
Steps
1. Select Shield Region.
2. Click
to draw shield region. Repeat this step above to set more shield regions.
3. Optional: Select and click on the drawn region, then click
region.
4. Optional: Click
5. Click Save.
10.5 People Management
People management is used to detect and analyze people number and changes in a predefined
region. It can be applied to the entrances and exits, supermarkets, etc.
Network Camera User Manual
to delete all drawn regions.
to delete the selected drawn
89
to display
Advertisement
Table of Contents
