Table of Contents
Advertisement
3. Check Face Picture Matting Object and Overlay Frame on Matting according to the actual
needs.
4. Set other parameters.
Face Close-up Picture Cutting Ratio
The higher the level is, the higher the cutting ratio will be.
Face Close-up Picture Ratio
The higher the value is, the higher the zoom level will be.
Matting Contrast Enhancement
Check Matting Contrast Enhancement and set Matting Contrast Enhancement Level. The
higher the value is, the higher the contrast level will be.
5. Set Close-up Picture Output Mode.
6. Click Save.
3.2.6 Set Vehicle Feature Parameters
Set vehicle feature parameters if you need to detect the vehicle features of the passing vehicle.
Steps
Note
The parameters vary with different models. The actual device prevails.
1. Go to Configuration → Capture → Capture Parameters → Vehicle Feature → Vehicle Feature.
2. Check Vehicle Color Recognition if you want to recognize the vehicle color.
3. Check Enable Vehicle Manufacturer Recognition if you want to recognize the vehicle
manufacturer.
4. Check Non-Motor Vehicle User Wearing Helmet Detection and set sensitivity level if you want
to recognize the helmet wearing condition.
5. Set Steering Wheel Location according to the actual condition.
6. Click Save.
Tyre and Axle Recognition Unit User Manual
Figure 3-6 Set Face Picture Matting
11
Advertisement
Table of Contents
