Table of Contents
Advertisement
R
•
•
Adapter Board PM Connectors
Tyco Z-Dok+ adapter board connectors, part number 1367555-1 are the receptacle
connectors on the personality modules that mate to the ML310 Tyco Z-Dok+ host board
connectors, part number 1367550-5. The Tyco data sheet for part number 1367555-1 is
available at http://www.z-dok.com/documents/1367555.pdf.
On the adapter board connectors, located on the personality module, each signal pair has
a pair of ground pins on the opposite side of the open space, as shown in
signal pairs alternate from side to side along the length of the open space. All of the "B" and
"E" pins are two contacts tied together and grounded on the personality module. The "A",
"C", "D", and "F" pins are signal pins.
ML310 PM Utility Pins
Contact Order
The Z-Dok+ power and ground pins contact in the following order:
•
•
•
64
1 single-ended clock at 2.5V
1 pin not connected
Figure 2-22: Adapter Board Connector Pin Detail
1 and 6;
then 2 and 5;
then 3 and 4
www.xilinx.com
1-800-255-7778
Get other manuals https://www.bkmanuals.com
Chapter 2: ML310 Embedded Development Platform
Plastic Housing
Copper Pins
Figure
2-22. The
ML310 User Guide
UG068 (v1.01) August 25, 2004
Advertisement
Table of Contents
