Hardware Features And Installation - Nbp 1200C - Extron electronics IP Link Pro NBP 50 User Manual

Network button panel

Table of Contents

Hardware Features

and Installation —

NBP 1200C

This section covers the following material for the NBP 1200C:

•

Overall Configuration Procedure, NBP 1200C

Step 1: Get Ready (NBP 1200C)

Step 2: Prepare the Installation Site, Cut the Table or Furniture

Step 3: Assemble AAP, Pass-through, and Power Modules

Step 4: Change Buttons (optional)

Step 5: Install Modules and a Retractor Bracket

Step 6: Mount the NBP 1200C to the Table

Step 7: Install Retractors

Step 8: Install Cables in the Cable Cubby

Step 9: Cable the NBP 1200C and Other Devices in the System

Step 10: Set up the NBP 1200C for Network Communication

Step 11: Configure the System

Step 12: Test and Troubleshoot

Network Button Panels • Hardware Features and Installation — NBP 1200Cs

Table of Contents

Need help?

Do you have a question about the IP Link Pro NBP 50 and is the answer not in the manual?