Connecting To Ac Power - Christie HS Series Installation And Setup Manual

Connecting to AC power

To operate the projector at full brightness, make sure the power supply meets the power
requirements for HS Series 2K projectors. See
Model name
DWU15-HS/DWU15A-HS
DWU19-HS/DWU19A-HS
DWU23-HS/DWU23A-HS
To ensure safe operation, only use the AC power cord provided with the product or recommended
by Christie. Connect the AC power cord to the AC inlet on the projector.
HS series 2K Installation and Setup Guide
020-002038-01 Rev. 1 (09-2022)
Copyright ©2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Power connection
Power requirements
100-240V, 50/60Hz, 10A
• 200-240V, 50/60Hz, 6.5A
• 110V, 50/60Hz, 12A for US only
200-240V, 50/60Hz, 8.5A
Installation and setup
on page 15 for more information.
28