Connecting To Ac Power - Christie Mirage 304K Installation And Setup Manual

3. Align the guides on the front cover and the lens marked by a red line.
4. Insert the lens into the projector and turn it clockwise until you hear two clicks.
The first click indicates the safety lock mechanism has been engaged.
5. Continue to turn the lens clockwise until you hear a second click.
The second click indicates the lens is fully locked in position. The top center label should face
up and be aligned to the lens guide on the front cover.

Connecting to AC power

The Mirage 304K projectors can operate in full or limited power modes, depending on the available or
required AC power source.
Power mode
Input 1: Full power
Input 2: Limited power
Mirage 304K (Bm.1) Installation and Setup Guide
020-102013-12 Rev. 1 (09-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Functionality
• Six lamp mode
• 30 amp rated connector
• 200 - 240 VAC
• Full brightness
• Single lamp mode
• 15 amp rated connector
Installation and setup
22