Table of Contents
Advertisement
ACCESS THE DEVICE
Step 1. Log in via the Web UI
Using a computer on the same subnet as the static network interface shown in "Hardware Installation" on
page 1, access the web UI with your web browser at
Note: The device has a self-signed SSL certificate. Your browser will display an "Untrusted
connection" warning. Click through the warning to access the login page.
To log in for the first time, enter the username root and password default and click Submit.
Step 2. Change the Root Password
When logging in to the device for the first time you will be prompted to change the root password
immediately.
Note: Users are prevented from reusing the word "default" as their password. The factory default
password automatically expires after a factory reset and users must choose a new password. This
policy is applied through the WebUI, Config Shell and CLI.
Enter the current password followed by the new password and click Log in.
The ACCESS > Serial Ports page appears displaying a list of connected serial devices and links to a
Web Terminal or SSH connection for each.
https://192.168.0.1/
.
6
Advertisement
Table of Contents
