Table of Contents
Advertisement
Configure the Connect IT 16/48
Change a Connect IT password
You can change either the root password or the user password for the Connect IT.
1.
Log in
to manage the Connect IT.
2.
Access the Configuration > Authentication
3. Expand the Users section.
4. Determine for whom you want to change the password.
Expand the root section to change the root password for the Connect IT.
n
Expand a section with a user name to change the password that user would use when
n
logging on to the Connect IT.
5. In the Password field, enter a new password.
6. Select the Show option if you want the password to display in the field. If you don't select this
option, a series of dots displays.
7. Click Save or Apply.
Manage users and groups
Users and groups work together to enable access to the desired serial ports and other features.
Groups are assigned to user profiles and the users in the group inherit the access rights specified for
that group.
Create a group
You can create a group that represents a set of users that should have the same access rights. After a
group has been created, you should configure it to allow access to the desired serial ports and
features. Users inherit the rights specified for that group.
1.
Log in
to manage the Connect IT.
2.
Access the Configuration > Authentication
3. Expand the Groups section.
4. Click Add or +.
5. In the Add Group field, enter the group name.
6. Click Add or OK. The new group is immediately added to the list of groups.
7. Click Save or Apply.
8.
Configure an access control
Configure an access control group
You can configure an access control group to allow access to the desired serial ports and features.
Note
The users to which this group is assigned inherit the access rights configured for the group. For
information about assigning a group to a user, see
group.
Digi Connect IT® 16/48 User Guide
screen.
screen.
group.
Create a user profile and assign an access control
Change a Connect IT password
16
Advertisement
Table of Contents
