Change The Ip Address From The Web Interface, As Needed - Digi LTS 32 User Manual

Change the IP address from the web interface, as needed

Normally, IP addresses are assigned to ConnectPort LTS products through DHCP. This procedure
assumes that the ConnectPort LTS product already has an IP address and you simply want to
change it.
1. Open a web browser and enter the current IP address for the ConnectPort LTS product in the
URL address bar.
2. If security is enabled for the ConnectPort LTS product, a login prompt is displayed. Enter the
user name and password for the device. The default username is root and the default password
is dbps. If these defaults do not work, contact the system administrator who set up the device.
3. Click Network to access the Network Configuration page.
4. On the IP Settings page, select Use the following IP address.
5. Enter an IP address (and other network settings), then click Apply to save the configuration.
49