Table of Contents
Advertisement
54 / Programming
A line number must always be entered as a three-digit number.
Line numbers from 10 to 99 must be entered with a leading
zero (line 020, for example). Similarly, line numbers less than
10 must be entered with two leading zeros (line 002, for
example).
Internal telephone numbers, also referred to as directory
numbers (DNs), can be three to seven digits long. The DN
length can be changed in programming.
Template defaults
This section describes only the defaults that apply to
Companion programming. For all other default settings, refer
to MICS Programming Record.
Note: (U.S. only). Before registering Companion portable
telephones you must first obtain and enter a certain
number of portable credit keys. Also keep in mind,
before the Base Stations can be recognized by the XC
system, you must obtain and enter a UTAM Activation
Key. Please refer to "Software keys (U.S. only)" on
page 68 before setting up your wireless system.
Startup defaults
Setting
NA-MICS 4.0 template
MICS-XC 4.0 template
Start DN
Passwords defaults
*
Reg. pswd
Setting
Reg. pswd
MICS-XC Norstar-Companion Installer Guide
Square
PBX
221 (may be different for upgraded systems)
PBX default
72346
Default
DID default
P0881594 Issue 01
Advertisement
Table of Contents
