Turning Off The Host Machine; Installation Procedure - Canon iR C2880 Series Service Manual

Chapter 2
[1]
[3]
F-2-191
No. Name
[1] Option power supply
[2] Finisher connector mount
[3] Screw (RS tightening; M3X8.5)
[4] Screw (W SEMS; M3X8)
[5] Screw (TP; M3X6)

2.18.2 Turning Off the Host Machine

iR C3380i / iR C3380 / iR C2880i / iR C2880 / iR C3580 / iR C3580i / iR
C3080 / iR C3080i / iR C2380i
See the host machine installation 'Points to Note When Turning Off the Main
Power'.

2.18.3 Installation Procedure

iR C3380i / iR C3380 / iR C2880i / iR C2880 / iR C3580 / iR C3580i / iR
C3080 / iR C3080i / iR C2380i
1. Attaching the option power supply PCB.
1) Release the 5 wire saddles [1] at the rear upper cover and free the 2 cables
[2] upward.
[2]
[1]
F-2-192
2) Detach the rear upper cover [1].
- 4 screws [2] (to remove)
- 3 screws [3] (to loosen)
2-46
[2]
[4] [5]
Part No. Qty.
FK2-3078-000 1 pc.
FM2-0255-000 1 pc.
XA9-1386-000 1 pc.
XB2-8300-807 1 pc.
XB6-7300-607 4 pc.
[2]
[1]
3) In the case that the power cord [1] of the heater for the cassette pedestal
has been installed, detach the plug cover [2] and disconnect the power
cord [1].
- 2 screws [3]
0014-1282
[2]
[1]
0018-6978
4) In the case that the cassette pedestal [3] has been attached, disconnect the
lattice connector [4].
5) Detach the rear lower cover [1].
- 7 screws [2]
[3]
F-2-193
[3]
F-2-194
F-2-195
[2]
[2]
[1]