Canon iR C2880 Series Service Manual page 546

Chapter 17
Code Jam Name / Sensor of Finisher-M1
1787 -
1788 -
1791 -
1792 -
1793 -
17A1 -
17A2 -
17A3 -
1781 bunch putting out JAM(bunch putting out HP sensor)
Code
1103 Copier paper delivery delay jam
1104 Paper delivery pileup jam
1105 -
1500 Staple jam in stapler
1300 Jam at power ON
1400 -
1011 -
1013 -
1014 -
1121 -
1123 -
1124 -
1125 -
1181 Jam when pressing bun
1182 Jam when returning bundle
1186 -
1187 -
1188 -
1191 -
1192 -
11A1 -
11A2 -
- ff: Jam sensor (DADF)
Jam name Code
Separation delay 0002
Paper feed delay 0003
Paper feed pileup 0005
Separation early delivery 0006
17-10
T-17-8
Finisher M1 sensor/type
T-17-9
Sensor Condition
SR3 Separation sensor (SR3) didn't turn ON within 500 msec after separation motor (M1) switched to
drive (forward).
U502 Registration front sensor (U502) didn't turn ON within 1 sec from separation sensor (SR3) (for small
size) or near separation sensor (for large size).
U502 Registration front sensor (U502) didn't turn OFF after conveyor motor turned ON and operated for
500 msec, after formation of resist loop.
SR3 Separation sensor (SR3) was ON during start of document separation.
Jam Name / Sensor of Finisher-W1/W2
Saddle power on jam (Primary paper sensor / secondary paper sensor / tertiary
paper sensor / vertical path paper sensor / saddle inlet sensor / delivery sensor
/ paper positioning plate paper sensor)
Saddle door open jam (Delivery cover sensor / inlet cover sensor / front cover
open/close sensor)
Saddle delivery path sensor delay jam (Primary paper sensor)
Saddle delivery sensor delay jam (Delivery sensor)
Saddle inlet sensor delay jam (Saddle inlet sensor)
Saddle delivery path sensor stationary jam (Primary paper sensor / secondary
paper sensor / tertiary paper sensor)
Saddle delivery sensor stationary jam (Delivery sensor / vertical path paper
sensor)
Saddle inlet sensor stationary jam (Saddle inlet)
-
Finisher N1/saddle finisher N2 sensor/type
-
-
Jam due to early arrival while switching trays
Staple jam in stapler
Jam at power ON
Front top cover OPEN jam
Inlet path sensor delay ja
Buffer path sensor delay jam
Paper delivery path sensor delay jam
Inlet path sensor pileup jam
Buffer path sensor pileup jam
Paper delivery path sensor pileup jam
Staple tray sensor pileup jam
-
-
Staple jam in saddle stapler
Saddle power ON jam
Front lower cover OPEN jam
Saddle conveying path sensor delay jam
Saddle fold path sensor delay jam
Saddle conveying path sensor pileup jam
Saddle fold path sensor pileup jam