Installing The Voice Guidance Kit; Checking The Contents - Canon iR C2880 Series Service Manual

Chapter 2
[2]
[1]
[2]
F-2-132
15) Wrap the harness [1] around the cable guide [2] on the power cord
mount. (One and a half turn)
[2]
F-2-133
16) Connect each of the connectors at both ends of the harness unit to the
heater connector and the AC power supply connector respectively.
17) Attach the external cover of the paper deck in the following orders.
[1] Upper cover (Make sure that the cable is not stuck in) (M4X8; 2
screws)
[2] Upper front cover (Connect the connector) (M4X8; 3 screws)
[3] Rear cover (M3X8; 2 screws, M4X8; 4 screws)
[4] Right cover (M4X8; 3 screws)
18) Slide the paper deck in the left direction and set it to the host machine.
19) Connect the paper deck connector [1] to the rear surface of the host ma-
chine.
F-2-134
20) Connect one of the AC cable (for the host machine outlet) to the power
[1] Speaker Unit (Upper)
[3] Cable (1300 mm)
2-32
[1]
[2]
[1] [1]
cord mount of the heater, and the other to the cassette pedestal of the host
machine.
21) Put the plug cover [1] to the AC cable connector, and fix it with the screw
[2].
22) Affix the power label [3] to the rear cover of the paper deck as shown in
the figure below.
[3]
Be sure to tell the users not to place any things within the shaded area for
not disturbing opening/closing the paper deck when connecting the power
plug of the heater.
[1]
[2]
[1] Host machine
[2] Front side
[3] Paper deck

2.15 Installing the Voice Guidance Kit

2.15.1 Checking the Contents

iR C3380i / iR C3380 / iR C2880i / iR C2880 / iR C3580 / iR C3580i / iR
C3080 / iR C3080i / iR C2380i
<Voice Guidance Kit-B1>
[2]
] [9]
1 pc. [2] Speaker Unit (Lower)
1 pc. [4]* Cable (1850 mm)
[1] [2]
F-2-135
[3]
[3] [4]
[10] [11] [12]
F-2-136
1 pc.
1 pc.
0014-2056
[5]
[13]