Canon iR C2880 Series Service Manual page 604

Chapter 17
Sub item
U-NAME Use it to set a user name required to connect to the SSH server.
Sets a login user name required to connect to the SSH server. Only one user can login the server.
Setting range
8 characters maximum (English one byte characters)
[Factory default/After RAM clear: gN3Fp2A]
U-PASWD Use it to set a password of the user required to connect to the SSH server.
Sets a password of the login user required to connect to the SSH server.
Setting range
8 characters maximum (English one byte characters)
[Factory default/After RAM clear: Vs8DuwJ]
The password is left hidden on the screen.
DA-PORT Setting port for communication with DA
Settings
0: Close
1: Open
[Factory default/After RAM clear:0]
Caution!
The following modes also become ON when COPIER>OPTION>BODY>DA-CNCT is set to '1'.
COPIER>OPTION>BODY>STS-PORT
COPIER>OPTION>BODY>CMD-PORT
COPIER>OPTION>BODY>SSH-SW
COPIER>OPTION>BODY>DA-PORT
DA-CNCT Setting for connection with DA
Settings
1: DA is used.
0: DA is not used.
[Factory setting/value after clearing RAM: 0]
Note:
The items listed below are also set to ON when this item COPIER>OPTION>BODY>DA-CNCT is set to "1."
- COPIER>OPTION>BODY>STS-PORT
- COPIER>OPTION>BODY>CMD-PORT
- COPIER>OPTION>BODY>SSH-SW
- COPIER>OPTION>BODY>DA-PORT
MEMO:
This is used on machines marketed in Japan only. It is not used on overseas machines.
Fixer replacement message ON/OFF
This sets to ON or OFF the "Get ready to replace the fixer" message that appears on the user operation screen after the
fixed counter has reached the count which represents the end of the fixer's service life.
Settings
0: The message is not displayed.
1: The message is displayed.
[Factory setting/value after clearing RAM: 1]
FXMSG-SW Fixing unit replacement message ON/OFF
This sets to ON or OFF the "Get ready to replace the fixing unit" message that appears on the user operation screen after
the fixing unit counter has reached the count which represents the end of the fixing unit's service life.
Settings
0: The message is not displayed.
1: The message is displayed.
[Factory setting/value after clearing RAM: 1]
Do not use it in service usually.
MEMO:
- When FXMSG-SW is set to "1" (default "0") and COPIER>OPTION>BODY>FXWRNLVL are only "1" (default "0"),
the machine tries to detect fixing unit life. And when it reaches the established machine longevity, the exchange message
is displayed.
- The content of the established machine exchange message is as follows.
"Prepare a new fixing roller. Call service representative."
Do to the following treatment when this message is displayed.
1) After power OFF, exchange the fixing unit(fixing film unit + pressure roller, or fixing unit).
2) After power ON, select COPIER>FUNCTION>CLEAR>CNT-DCON, and push the OK key.
3) Turn OFF/ON the power.
CHNG-STS Setting of T.O.T (TUIF over TCP/IP) status connection port number
This sets the number of the port used for the status connection in T.O.T. It is used when changing the port number with
service NAVI.
Setting range: 1 to 65535
[Factory setting/value after clearing RAM: 20010]
MEMO:
T.O.T (TUIF over TCP)
A communication protocol (unique to Canon) for the presentation of built-in applications (UI) and for communicating
between applications inside the machine such as COPY, SEND and BOX.
CHNG-CMD Setting of T.O.T (TUIF over TCP/IP) command connection port number
This sets the number of the port used for the command connection in T.O.T. It is used when changing the port number
with service NAVI.
Setting range: 1 to 65535
[Factory setting/value after clearing RAM: 20000]
MEMO:
T.O.T (TUIF over TCP)
A communication protocol (unique to Canon) for the presentation of built-in applications (UI) and for communicating
between applications inside the machine such as COPY, SEND and BOX.
17-68
COPIER>OPTION>BODY
Description level.
2
2
2
2
2
2
2