Canon iR C2880 Series Service Manual page 477

4. Adjusting the Margin Along the Leading Edge (2nd side)
Make a double-sided copy using the cassette 1 as the source of paper; then,
check to see if the margin along the image leading edge for the 2nd side (L)
is 4.0 +1.5/-1.0 mm. If not, make adjustments as follows:
1) Make the following selections in service mode: COPIER > ADJUST >
FEED-ADJ > RG-REFE.
2) Change the setting, and make adjustments. (A change of '1' will cause a
shift of 0.1 mm, with a higher setting moving the image toward the lead-
ing edge.)
L1
F-14-23
An increase in RG-REFE will shift the image toward the leading edge of
paper (toward the trailing edge of feed).
3) Record the new adjustment value on the service label.
- RG-REFE
image
Chapter 14
14-7