Initial Settings - FLIR Ariel Gen IIICB-3308 User And Installation Manual

Configuration and Operation
Rule
Object Dropped
The following topics are covered below:
·
General Guidelines
·
Camera Distribution
·
Camera Positioning
·
Detection Ranges
·
Mounting and Lighting

5.3.1.6.8.1 Initial Settings

If setting up Basic Video Analytics for the first time, see
License, Providing cameras with Basic Video Analytics Licenses
The setup for the Analytics Rules follow the same general setup sequence for all Rules. Each
Rule has specific configurations that are described in detail in each relevant section.
Notes:
1. It is important that the camera is properly positioned to allow an adequate Field of View.
2. All Rules are directional. A rule's direction is indicated in the Setup screen.
3. Only one rule may be active at a time.
General Setup
1. The first time a user starts configuring the Analytics pages, the
completed. This configures the minimum and maximum object sizes to be detected in a scene.
2. The user will then draw desired lines or zones depending on the specific rule.
3. Each rule's "basic" page will vary depending on the required settings.
4. The Advanced Options
Arming Schedule.
5. The final step is to choose the
72
Purpose
Detect objects being
introduced to the scene
·
Basic Video Analytics
Camera License
·
Initial Settings
section is used to change Sensitivity, create exclusive Masks and set an
Analytic Action
CB-3304/CB-3308 User and Installation Guide
Usage
A single defined area
·
Rule-based Settings
·
Counting
·
Border Line
·
Loitering
·
Area Protection
·
Object Removal
·
Object Dropped
Basic Video Analytics Camera
Initial Settings
to be trigger when a rule is activated.
Example
Securing public areas,
such as transportation
hubs, against suspicious
objects
·
Advanced Options
·
Analytics Actions
·
Analytics
Troubleshooting
page must be
March 10, 2019