Area Protection - FLIR Ariel Gen IIICB-3308 User And Installation Manual

Configuration and Operation
Advanced Options
Analytics Actions
The Video Analytics > Area Protection screen is used for configuring the area detection analytic
capability.
This page allows you to:
·
Configure a detection area using 3 to 8 points
·
Specify directional preference to detect people leaving or entering desired area
·
Reset Max and Min Object size
·
Configure advanced settings, including sensitivity, area masking, reset scene and arming schedule
·
Analytics actions
Use the Area Protection rule to secure an area against any incoming or outgoing traffic (humans or
vehicles). For example, a secluded or cordoned area, such as a police controlled zone.
Draw a line around the designated zone, forming a closed shape. Allow some space before the point of
entry for the camera to process and analyze objects as they near the line.
See the Initial Settings
Zone Settings:
This section allows the user to create an area using between 3 and 8 points in order to configure the
desired space
Clicking on the video scene will produce points for area creation. Once three points are selected, a full area
will appear. Clicking more, will create more points creating more complex shapes. After 5 points are
created, 3 more can be added by clicking on individual lines, allowing for more specific shapes.
Pressing the Delete button
Pressing the Direction button
moving.
84
section for more information on the setup process:
clears the area entirely, starting the area configuration from nothing.
the user can change the direction by which they want to detect people
CB-3304/CB-3308 User and Installation Guide
March 10, 2019