FLIR Ariel Gen IIICB-3308 User And Installation Manual page 89

·
Reset Max and Min Object size
·
Define Loitering Time
·
Configure advanced settings, including sensitivity, area masking, reset scene and arming schedule
·
Analytics actions
Use the Loitering rule to monitor an area with relative light traffic, but in which an extended stay is
prohibited. For example, the area around an ATM or in front of a door, where people are expected to move
through and not linger for a long time.
Draw a line around the protected area, forming a closed shape. The minimum loitering duration can be up
to 300 seconds.
See the Initial Settings
Zone Settings:
This section allows the user to create an area using between 3 and 8 points in order to configure the
desired space
Clicking on the video scene will produce points for area creation. Once three points are selected, a full area
will appear. Clicking more, will create more points creating more complex shapes up to 8 points
Pressing the Delete button
Basic Settings:
For general "Basic Settings" see
Loitering Time
This section is used to configure the duration of a loitering event in order for a rule to be triggered. This can
be changed from the default of 30 second by dragging the slider or typing a number into the text box.
See the following sections for more information on Advanced options and Analytics actions (completion of
rule configuration)
March 10, 2019
section for more information on the setup process:
clears the area entirely, starting the area configuration from nothing.
Basic Settings
CB-3304/CB-3308 User and Installation Guide
Configuration and Operation
83