Counting - FLIR Ariel Gen IIICB-3308 User And Installation Manual

Configuration and Operation
The Video Analytics > Counting screen is used for configuring the people counting analytic capability.
This page allows you to:
·
Configure up to 3 directional lines used for people counting
·
Reset Max and Min Object size
·
View and reset count results
·
Configure advanced settings, including sensitivity, area masking, reset scene and arming schedule
·
Analytics actions
Pay special care to setting appropriate minimum and maximum size object markers, to cover a wide
variety of body types, as they're viewable from above.
Draw up to three lines on the screen. Each line should cover a potential point of transit, so be sure that the
area is not obstructed or hidden by other objects in the scene and that the potential transit path goes
through the line at a close to 90deg angle.
See the Initial Settings
Line Settings:
This section allows the user to add directional lines to specify the area and direction to detect and count
people walking.
Pressing the Add Line button
Pressing the Remove Line button
Pressing the Direction button
moving.
Basic Settings:
For general "Basic Settings" see
78
section for more information on the setup process:
the user can draw a line in the desired area of the camera view.
the user can remove the currently selected line.
the user can change the direction by which they want to count people
Basic Settings
CB-3304/CB-3308 User and Installation Guide
March 10, 2019