Tampering - FLIR Ariel Gen IIICB-3308 User And Installation Manual

To set a trigger interval
1. Select Enable. By default, Enable is not checked.
2. Move the Trigger Interval slider from 1 to 3600 seconds. The default setting is 10 seconds.
See relevant instructions in the Alarm section for the following actions:
Store a snapshot, Record the event on the
text, or Set the arming schedule

5.3.1.5.6 Tampering

The Events Source > Tampering screen enables you to:
·
Enable and define tampering settings
·
Send an alarm upon a tampering event
·
Define the method for storing a snapshot in the camera's microSD card
·
Sending a snapshot of the event to an FTP server
·
Record an event in the camera's microSD card
·
Send email notifications
·
Display text on-screen if there is a tampering event
·
Set the alarm schedule
March 10, 2019
Events Source > Schedule Screen
camera, Sending an email
CB-3304/CB-3308 User and Installation Guide
Configuration and Operation
notification, Define OSD
63