Lens Control - FLIR Ariel Gen IIICB-3308 User And Installation Manual

Configuration and Operation
5.3.1.1

Lens Control

The Lens Control screen enables control of the lens zoom and focus functions.
To set the zoom control
1. In the Zoom Control section, move the slider to the desired zoom between Wide (1.00) to Tele
(3.00).
To set Auto Focus
2. In the Focus Control section, click Start. Auto Focus is adjusted.
Note:
If the Auto Focus function does not produce a clear picture, do the following:
1. Click Reset in the Reset Lens section.
2. Click Start in the Focus Control section. The image refocuses.
3. Continue with the lens setup procedure.
34
Figure 36: CM-330X-11-I Lens Control Screen
CB-3304/CB-3308 User and Installation Guide
March 10, 2019