Recording - FLIR Ariel Gen IIICB-3308 User And Installation Manual

Configuration and Operation
2. Click one of the buttons listed above for the desired action from the Live View toolbar.
The following topics are covered below:
·

Recording

5.2.1 Recording
Manual recordings (which are triggered from the Live View screen) are stored on the PC.
To start recording a Live View scene
1. Click the red Manual Recording icon
is displayed in the upper right corner of the Live View window, under the date and time display.
Note:
In order to save recordings on your PC, Internet Explorer should be run as Administrator.
2. Select the directory and folder to save the video, which is an .avi file.
3. Click the icon to stop recording. The icon turns gray
To playback a Live View recording
1. Open the folder on the PC where the recording is stored.
2. Select the file.
Recordings that are triggered by events (such as motion detection) are stored on a microSDXC card, which
can store up to 128GB of data. The card is not included.
To view a triggered event recording
Note: Before starting this step, the user has to first enable access to ftp under Settings > Network > FTP
Server
1. In your browser, enter the camera's FTP address (ftp://camera_ip/).
2. Enter the user name admin and password admin.
3. Open the folder for the event according to the type of event (motion detection, tampering, etc.).
Files are displayed chronologically according to most recent date.
4. Select the file.
28
·
Capturing a Picture
on the toolbar. The camera starts recording. A red dot
CB-3304/CB-3308 User and Installation Guide
·
Viewing Live Video from a Media
.
Player
March 10, 2019