FLIR Ariel Gen IIICB-3308 User And Installation Manual page 27

Tip:
Record the camera's MAC address for future reference.
8. To change the IP address, do one of the following:
a. For DHCP (not supported by Latitude):
i. Select Use DHCP. Do not use for Latitude.
ii. Click Update and wait for status.
b. For Static IP (recommended for Latitude users):
i. Do not select the Use DHCP checkbox. This is recommended for security purposes
and for and Latitude users. In the IP Address, Gateway, and Netmask, enter the
respective LAN/VLAN (optional DNS) values.
ii. Click Update and wait for
March 10, 2019
DNA Assign IP – Static IP Dialog Box
OK status to be displayed.
CB-3304/CB-3308 User and Installation Guide
Setting up for Configuring the Camera
21