FLIR Ariel Gen IIICB-3308 User And Installation Manual page 95

Up to 3 masks can be configured, one is enabled by default. The user sets the mask by clicking on the
camera view and making 3-8 points which can be moved and reshaped to mask the desired area.
Clicking the button will clear the configured mask of the currently selected mask. Clicking Save will
save the configurations of all "Enabled" masks.
Reset Scene
Clicking Reset Scene will relearn the scene and the background in case the scene has changed or the
camera has been moved.
To set the arming schedule
1. In the Arming Schedule Setting area, click Edit. The Edit screen opens.
2. In the Start Time column, enter the time(s) and day(s) you want to trigger an action.
3. In the End Time column, enter the time(s) and day(s) you want to stop the action.
4. Select the Action checkbox if you want to enable the action at these times.
5. Select the Select/Deselect All checkbox as required.
March 10, 2019
CB-3304/CB-3308 User and Installation Guide
Configuration and Operation
89