Inserting And Configuring The Microsd Card - FLIR Ariel Gen IIICB-3308 User And Installation Manual

Installation
3.4

Inserting and Configuring the microSD Card

A microSD card (not supplied) must be inserted in the camera in order to locally store a snapshot or
recording triggered by an event. The microSD card slot is located on a printed circuit board inside the
camera housing. To install a microSD card:
1. After removing the camera's cover, insert a microSDXC card (Min recommended 4GB, up to 128GB,
Class 10) in the card slot.
2. Be sure that a new desiccant is inserted inside the enclosure.
3. Replace the cover and screw the enclosure shut.
4. Verify that the card status is displayed as mounted in the System > Events Handler > SD Card
screen.
5. Configure the camera to store snapshots and recordings from the System > Events Source
screens.
12
CB-3304/CB-3308 User and Installation Guide
March 10, 2019