FLIR Ariel Gen IIICB-3308 User And Installation Manual page 63

To Enable an alarm
1. Select the Enable checkbox. By default, Enable is not checked.
To Select the type of alarm
1. From the Type drop-down list, select Normally Open or Normally Closed.
To Define the method to store a snapshot
1. In the Snapshot section, select the Store on Edge checkbox to store a snapshot on the camera's
microSD card. By default, it is not checked.
2. In the Snapshot section, select the Store to FTP checkbox to store a snapshot on a remote FTP
site. By default, it is not checked.
To Record an event on the camera
1. In the Recording section, select the Record on Edge checkbox to record a clip on the camera's
microSD card. By default, it is not checked.
2. Click Save.
To Enable sending an email notification
1. In the Email section, select the Enable checkbox. By default, Enable is not checked.
2. In the Subject text box, enter the email subject text.
3. In the Message text box, enter the email message text.
4. Click Save.
To Define OSD text
1. In the OSD section, select the Enable checkbox. By default, Enable is not checked.
2. In the Text text box, enter the text to display in the on-screen display.
3. Click Save.
To Set the arming schedule
1. In the Arming Schedule Setting area, click Edit. The Edit screen opens.
March 10, 2019
CB-3304/CB-3308 User and Installation Guide
Configuration and Operation
57