FLIR Ariel Gen IIICB-3308 User And Installation Manual page 46

Configuration and Operation
To configure OSD settings
1. Select Basic Configuration > OSD. The OSD screen is displayed.
2. In the Basic Settings section, configure the following settings for OSD-1 and OSD-2:
·
Enable – From the drop-down list, select one of the following:
·
·
·
·
Back ground Color – From the drop-down list, select Black or Transparent (default setting).
·
Text Color – From the drop-down list, select Black or White (default setting).
·
Location X – Move the slider from 1 to 10 to set the location on the screen for the OSD.
The default setting is 1.
·
Location Y – Move the slider from 1 to 10 to set the location on the screen for the OSD.
The default setting is 1.
3. In the Event section, configure the following settings in case an event occurs:
·
Back ground Color – From the drop-down list, select Black or Transparent (default setting).
·
Text Color – From the drop-down list, select Black or White (default setting).
40
Date – Enables you to enter the date to display.
Text – Enables you to enter the time to display.
OFF – Disables the OSD function. This is the default setting.
CB-3304/CB-3308 User and Installation Guide
OSD Screen
March 10, 2019