FLIR Ariel Gen IIICB-3308 User And Installation Manual page 118

Configuration and Operation
Continue to configure the other settings in the Exposure section:
·
Shutter Speed – Select the shutter speed from the following options:
·
Gain – Set the gain between 0-48 dB. Increasing the gain lightens dark pictures resulting from low-
level lighting. The default is 0.
·
Digital WDR – See the explanation in the
In the Day/Night Switch Control section, configure the following setting:
·
4K model ONLY - Enhanced Low Light Performance (ELLP) is check ed off by default, but can be
enabled. When camera is set to 4K, ELLP enhances the image and sensitivity. It also k eeps
cameras in color for longer before switching to black and white mode.
Note: ELLP may not be used when the camera is set to record images on an SoE card.
·
Mode – See the explanation in the
In the IR Control section, configure the following settings:
·
Mode – See the explanation in the
·
LED Brightness – See the explanation in the
Click Reset if you want to return to factory default settings.
112
Manual
Shutter Speed
PAL NTSC PAL
1/25 1/30 1/1000
1/50 1/60 1/2500
1/100 1/120 1/5000
1/250 1/250 1/10000
1/500 1/500
Auto Mode
Auto Mode section above.
Auto Mode section above.
Auto Mode
CB-3304/CB-3308 User and Installation Guide
NTSC
1/1000
1/2500
1/5000
1/10000
section above.
section above.
March 10, 2019