Border Line - FLIR Ariel Gen IIICB-3308 User And Installation Manual

The Basic Settings section shows which lines are currently being used and the count of people or object
that have passed based on the configured rule.
Reset Counting
Clicking Reset Counting will set the count back to 0.
See the following sections for more information on Advanced options and Analytics actions (completion of
rule configuration)
Advanced Options
Analytics Actions
The Video Analytics > Border Line screen is used for configuring the border line detection analytic
capability.
This page allows you to:
·
Configure up to 3 directional lines used for border detection
·
Reset Max and Min Object size
·
Configure advanced settings, including sensitivity, area masking, combine rules, reset scene and
arming schedule
·
Analytics actions
Draw up to three lines on the screen. Each line should cover a potential point of transit, so be sure that the
area is not obstructed or hidden by other objects in the scene and that the potential transit path goes
through the line at a close to a 90deg angle.
Allow some space before the point of entry for the camera to process and analyze objects as they near the
line.
The line can be adjusted in angle, length, and location after it's drawn.
See the Initial Settings
Line Settings:
This section allows the user to add directional lines to specify the area and direction to detect people and
objects crossing a border.
March 10, 2019
section for more information on the setup process:
CB-3304/CB-3308 User and Installation Guide
Configuration and Operation
79