Flickerless Mode - FLIR Ariel Gen IIICB-3308 User And Installation Manual

Configuration and Operation
·
B/W – Select B/W (black and white) for nighttime operation. This activates IR mode by
putting the camera into Night mode.
·
Time – Select Fast, Normal, or Slow to set the reaction time of the IRC filter. When set to Fast,
the filter switches faster between Day and Night modes. The default setting is Normal.
In the IR Control section, configure the following settings:
·
Mode – Select Auto, ON, or OFF. The default setting is Auto.
·
LED Brightness – Select High, Medium, or Low. When set to High, the camera switches with
almost no delay between Color and B/W modes. The default setting is High.
Click Reset if you want to return to factory default settings.

5.3.3.1.2 Flickerless Mode

Flick erless mode eliminates flicker in indoor applications where fluorescent lighting is used. The darker the
ambient lighting, the slower the shutter speed should be.
In the Exposure section, configure the following settings:
·
Exposure Value – See the explanation in the
·
Back light Compensation – See the explanation in the
·
Digital WDR – See the explanation in the
In the Day/Night Switch Control section, configure the following settings:
108
Flickerless Exposure Mode Settings
Auto Shutter
Auto Shutter
CB-3304/CB-3308 User and Installation Guide
section above.
Auto Shutter section above.
section above.
March 10, 2019