Thread Clamp - VETRON 4000 Instruction Manual

06.09. THREAD CLAMP

INDEX MAX
A10 1
A29 3
T15 2000
D07 359
D08 359
O48 100
Thread clamp at turning back: clamp power on during turning back. The max. permissible time is set by T15 to protect
from damage.
Thread clamp at foot lifting: clamp power on during foot lifting. The max. permissible time is set by T15 to protect from
damage.
06.10. FOOT STROKE
-1-2
INDEX MAX
S09 3500
S10 3500
S11 3500
S12 3500
S13 3500
S14 3500
S15 3500
A32 99
A35 1
A45 1
A83 199
O85 2
MIN UNIT
0 -
0 -
1 ms
0 degree
0 degree
1 %
MIN UNIT
500 rpm
500 rpm
500 rpm
500 rpm
500 rpm
500 rpm
500 rpm
0 stitches
0 -
0 -
0
0 -
DESCRIPTION
Thread clamp:
0 = OFF
1 = ON
Thread clamp option:
0 = Thread clamp only at start of seam
1 = Thread clamp at start of seam and at turning back
2 = Thread clamp at start of seam and with foot lifting
3 = Thread clamp at start seam, at turning back and with foot lifting
Thread clamp power on time with foot lifting or at turning back
Position for activating of the thread clamp
Thread clamp power o angle
Duty cycle in time period which PWM activation
DESCRIPTION
Limit speed for 1st stroke height
Limit speed for 2nd stroke height
Limit speed for 3rd stroke height
Limit speed for 4th stroke height
Limit speed for 5th stroke height
Limit speed for 6th stroke height
Limit speed for the maximum stroke height
Number of stitches for automatic switch o 2nd foot stroke
0 = Manual deactivated
N = Number of stitches after which the 2nd foot stroke is auto-
matically deactivated
Speed limit during quick stroke adjustment:
0 = No limit
1 = Limit
2nd stroke adjustment:
0 = OFF
1 = ON
Quick stroke height adjustment:
See chapter 06.18. A04 - 6
Type of stroke adjustment sensor:
0 = No
1 = Contact switch
2 = Potentionmeter
03/2023
YSC-90A0 INSTRUCTION BOOK
31