Operation Of The Machine - VETRON 4000 Instruction Manual

03. OPERATION OF THE MACHINE

03.01. INSERTING THE NEEDLE (1-NEEDLE)
CAUTION! RISK OF INJURY!
Stitch and crush hazard in the sewing area
You can switch o the machine at the main switch or activate the „LOCKED MODE" by pressing the lock
button (X-button) on the function bar before changing the needle. The threading symbol is shown in the
display.
NOTE
Only use needles from the system intended for the machine.
(Needle system 134-35)
01. Push the lock button (X-button) on the function bar. The green light illuminates showing the active „LOCKED MODE",
or turn the machine o .
02. Loosen the screw 1
03. Push the needle in as far as it will go.Make sure that the groove
2
04. Tighten the screw 1
05. Push the lock button (X-button) or switch the machine on again.
05/2022
22
VETRON 4000 - FLAT BED MACHINE - INSTRUCTION BOOK
1
2
.
again.
on the needle is to the right side.
3
3