Table of Contents
Advertisement
03.07. TOP FEED STROKE
3
NOTE!
In order to avoid damage to the top feed adjustment device, please proceed as follows:
SETTING THE SMALL TOP FEED STROKE:
3
» Press button
on the function bar to switch to the large top feed stroke. LED lights up.
» Rotary knob
1
is unlocked. The small top feed stroke can now be set .
» Press button
again to switch to the small top feed stroke.
3
NOTE!
In order to set the large top feed stroke, it is necessary to switch to the small top feed stroke.
SETTING THE LARGE TOP FEED STROKE:
3
» Press button
on the function bar to switch to the small top feed stroke. LED does not light up.
» Rotary knob
2
is unlocked. The large top feed stroke can now be set.
» Press button
again to switch to the large top feed stroke.
3
ATTENTION!
It is not possible to set the small top feed stroke on knob
. The knob will jam if you try to do this. Do not try to overcome the resistance with greater force - this
2
can lead to mechanical damage to the machine.
1
2
1
larger than the large top feed stroke on knob
VETRON 4000 - FLAT BED MACHINE - INSTRUCTION BOOK
05/2022
29
Advertisement
Table of Contents
