05.03. USER SETTINGS
05.03.01. SELECT THE FUNCTION CATEGORY TO BE ADJUSTED
At Main sewing interface, press „User setting button" to enter „User setting interface". Most items are the parameter
setting by categorized function.
05.03.02. ADJUST PARAMETER VALUE
Click a function category icon to enter the interface. The parameter list is on the left side, where you can swipe the list
and select a parameter to adjust.
» The default value of parameter: click „Reset" button.
» Click „Save" button to save the modified result.
» Click „Reset" button to reset to default value.
05.03.03. CHANGE PASSWORD
At Main sewing interface, press Configuration key
„Password". You can set a new password, if the old password is entered correctly. The default technician
password is 051234.
. Enter „User setting interface", then select sub-item:
03/2023
YSC-90A0 INSTRUCTION BOOK
21