Preparation And Test - VETRON 4000 Instruction Manual

04. PREPARATION AND TEST

04.01. HOW TO ENTER THE INTERFACE
1
Press Config button
language, the machine model, make a factory reset, set pedal type, set the machine ZERO position, test the input and
output, etc. With the return key
04.02. SELECT MACHINE MODEL
At Preparation and Test interface, press icon „Model".
If the machine type is not set correctly the machine will not work properly. Normally, the control box has a di erent
default value with di erent model such as speed limit and actuator action angle, etc.
The machine ID is saved in memory of the control box or the machine head. For the VE4000, the default option is saved
in the memory of machine head (the chip is integrated on the 7 short keys assembly). If there are some problems with
the 7 short keys (function bar), you can select the options which are saved in the control box.
03/2023
16
YSC-90A0 INSTRUCTION BOOK
1
when switching on the controller to enter Preparation and Test interface. You can select:
you come back.
2
2