First Commissioning - VETRON 4000 Instruction Manual

01.06. TRANSPORT - PACKAGING - DISPOSAL - STORAGE /
FIRST COMMISSIONING / DECOMMISSIONING
TRANSPORT - PACKAGING - DISPOSAL - STORAGE
01. Transport of the machine
All machines are delivered packed.
The product must be checked for shipping damage after delivery. For subsequent damage within the customer's
operation, the manufacturer assumes no liability.
Make sure that the products are transported safely and with the utmost care at your facility.
Moving machines with EHS (electrically height adjustable) with wheels:
» Turn o the machine
» Make sure that the sewing machine head is not tilted back
» Put the table in the lowest position
» Pull power and pneumatic connections
» Release wheel brakes
» Grab the table top and push the entire machine to the new location
» Reconnect the electricity and pneumatics and tighten roller brakes
02. Packaging
The packaging material must be disposed of in accordance with local environmental protection regulations.
03. Disposal
The customer is responsible for the proper disposal. Disposal should comply with local environmental regulations.
NOTE!
Parts contaminated with lubricants or oils must be disposed of separately.
04. Storage
When not in use for a long time, the machines must be protected against dirt, moisture and corrosion
(e.g.: by an oil film).

FIRST COMMISSIONING

01. Before operating the machine, clean the machine thoroughly.
02. Check whether the machine or electrical cables are damaged.
03. Have specialists confirm that you are allowed to operate the machine with the mains voltage and that it is correctly
connected.
04. MACHINES WITH PNEUMATIC CONNECTIONS:
Connect the machine to the compressed air system. The operating pressure at the filter valve is 6 bar.
05. All covers must be mounted.
NOTE!
1.) Should deviations occur, do not operate the machine!
2.) Only connect the machine to a grounded power outlet!
DECOMMISSIONING
01. Switch o the machine at the control.
02. Pull out the mains plug.
03. Disconnect the machine from the compressed air supply, if available.
04. Clean the machine if necessary.
05. If possible, cover the machine to avoid soiling.
05/2022
12
VETRON 4000 - FLAT BED MACHINE - INSTRUCTION BOOK