VETRON 4000 Instruction Manual page 15

01.07. MOUNTING SAFETY DEVICES FOR TILTING
WARNING!
Work on safety devices must only be carried out by trained personnel!
1
Picture 1
SAFETY CYLINDER
1
» The safety cylinder
INFO:
If the cylinder is longer (max 310mm), the machine is moved further back.
That means the machine is safer and more stable in this position.
» If the machine is tilted back, the safety spring
the spring must be at least 5mm (Picture 3).
» The distance can be adjusted on the cylinder by turning the fork head
carrier must be readjusted. (Picture 2)
3
HOW TO MOUNT THE SAFETY CYLINDER
» Screw the cylinder carrier
The distance between the edge of the machine cutout and the cylinder carrier
The distance between the cylinder carrier
HOW TO MOUNT THE SAFETY SPRING
» Mount the safety spring
NOTE:
» The position of the safety cylinder and spring is important for the stability of the machine.
» The safety hinge
6
its starting position and the safety bar has not been pressed.
» This must be checked when the machine is received!
» Safety devices must not be removed or modified!
CRUSHING
Crushing and bruising due to tilting the machine
For di erent adjustments, the safety cylinder should be unhooked.
Caution is advised, when returning the sewing machine to its original position.
After work, reattach the safety cylinder.
2
Picture 2
1
AND SPRING :
5
should be approx. 304mm to 310mm long.
3 under the table.
3
5
5 on the machine housing with the screws
prevents the sewing machine from being levered out when the sewing machine is returned to
3
280mm
205mm
6
5
must be locked securely. The distance between the table top and
2
:
1
and the edge of the machine cutout is 280mm.
:
4
VETRON 4000 - FLAT BED MACHINE - INSTRUCTION BOOK
5
Picture 3
in or out. If this is not enough, the cylinder
3 is 205mm (minimum 203mm).
4
5mm
05/2022
13