Cleaning The Machine - VETRON 4000 Instruction Manual

04.03. CLEANING THE MACHINE

CAUTION! RISK OF INJURY!
Danger of crushing and cutting by the thread catcher
You can switch o the machine at the main switch or activate the „LOCKED MODE" by pressing the lock
button (X-button) on the function bar before cleaning the hook area. The threading symbol is shown in the
display. Failure to comply produces a risk of injury in case of an unintentional machine operation.
PLACES IN SPECIAL NEED OF CLEANING:
» Area under the stitch plate
» Area around the hook
» Bobbin housing
» Feeders
» Thread trimmer
» Needle area
Clean the hook area daily.
With increased lint production, depending on materials, clean the hook area several times a day.
For more cleaning tilt the machine back and clean the guard tub.
ADVICE!
Push the lock button (X-button) on the function bar to end the „LOCKED MODE" or switch the machine on again.
If you tilt the machine during power on, a gravity sensor automatically switches the machine into „LOCKED
MODE". This is noted on the display.
1
1
2
2
VETRON 4000 - FLAT BED MACHINE - INSTRUCTION BOOK
05/2022
35