Table of Contents
Advertisement
04.04. PNEUMATIC SYSTEM
CAUTION! RISK OF INJURY!
Compressed air hazard
You can switch o the machine at the main switch or activate the „LOCKED MODE" by pressing the lock
button (X-button) on the function bar before checking the pneumatic system. The threading symbol is
shown in the display. Failure to comply produces a risk of injury in case of an unintentional machine
operation.
CHECKING THE MAINTENANCE UNIT:
Check water in pressure regulator:
» The water level should not rise to the level of the filter cartridge
After unscrewing the drain screw
Clean filter cartridge:
» Dirt and condensation are seperated through the filter cartridge
» Disconnect the machine from the compressed air supply.
» Loosen the drain screw
There should not be any pressure in the machine pneumatic system.
» Unscrew the water seperator
» Unscrew the filter cartridge
Wash the filter shell and cartridge with cleaning fluid (no solvent) and blast clean.
» Re-assemble the maintenance unit.
Check for system leaks.
ADVICE!
Push the lock button (X-button) on the function bar to end the „LOCKED MODE" or switch the machine on again.
05/2022
36
VETRON 4000 - FLAT BED MACHINE - INSTRUCTION BOOK
1
2
3
, the water will flow under pressure out of the water seperator
3
3
.
2
.
1
.
1
.
.
1
.
2
Advertisement
Table of Contents
