Oil Level Check - VETRON 4000 Instruction Manual

04.02. OIL LEVEL CHECK

1
Maximum
Minimum
Check the oil level before starting!
ADVICE:
The handling and disposal of mineral oils is subject to legal regulation.
Deliver used oil to an authorized collection point.
Protect your enviornment. Take care not to spill oil.
INFO!
By tilting the machine during power on, a gravity sensor automatically switches the machine into „LOCKED
MODE". This is noted on the display.
01. Tilt the machine to the back. The oil tank is located below the base plate.
02. If necessary, slightly pull the oil plug
03. Please use only oil types recommended by VETRON.
E.g.: Oil PP 20 DAB 10
(Viscosity 40° C: 15 mm2/s; Flashpoint: 150°)
(Can be ordered under the number: SuS 6436)
WARNING!
Oil on the skin, or swallowed.
If you get oil on your skin, make sure you clean it o the skin thoroughly.
In case you should swallow the oil seek medical attention immediately.
Or call the service hotline: +49 631 / 2014 - 460
05/2022
34
VETRON 4000 - FLAT BED MACHINE - INSTRUCTION BOOK
1 and fill the tank up to the "MAX" marking.